Kyung-min Lee, Chang-Hyuk Lee, Soonwook Hwang, Jiwon Choi, and Young-bong Bang, “Power-assisted wheelchair with gravity and friction compensation”, IEEE Transactions on Industrial Electronics, Vol. 63, No. 4, pp. 2203?2211, 2016.
Chang-Hyuk Lee, Bu Hyun Shin, and Young-bong Bang, “Designing a permanent-magnetic actuator for vacuum circuit breakers using the Taguchi method and dynamic characteristic analysis”, IEEE Transactions on Industrial Electronics, Vol. 63, No. 3, pp. 1655?1664, 2016.
Kyung-min Lee, Jiwon Choi, and Young-bong Bang, “Shaft position measurement using dual absolute encoders”, Sensors and Actuators A: Physical, Vol. 238, pp. 276?281, 2016.
Chang-Hyuk Lee, Kyung-min Lee, Jehong Yoo, In-su Kim, and Young-bong Bang, “A compact stair-climbing wheelchair with two 3-DOF legs and a 1-DOF base”, Industrial Robot: An International Journal, Vol. 43, No. 2, pp. 181?192, 2016.
Young-bong Bang and Minkeun Yoon, “3-speed transmission using dual motors and one-way clutches”, IEEE/ASME Transactions on Mechatronics, Vol. 21, No. 1, pp. 412?418, 2016.
Jiwon Choi, Chang-Hyuk Lee, Kyung-min Lee, Sung-Joon Ye, and Young-bong Bang, “Automatic C-arm repositioning using a two-bar link system for reducing radiation exposure”, Journal of Mechanics in Medicine and Biology, Vol. 15, No. 6, pp. 1540054 (10 pages), 2015.
Yang-Kyun Park, Tae-geun Son, Hwiyoung Kim, Jaegi Lee, Wonmo Sung, Il Han Kim, Kunwoo Lee, Young-bong Bang, and Sung-Joon Ye, "Development of real-time motion verification system using in-room optical images for respiratory-gated radiotherapy", Journal of Applied Clinical Medical Physics, Vol. 14, No. 5, pp.25-42.2013Hyunseok Lee, Won Seok Lee, Jong In Park, Kwang-Jae Son, Min Park, Young-bong Bang, Young Bin Choy, and Sung-Joon Ye, “Surface coating for prevention of metallic seed migration in tissues”, Vol. 42, No. 6, pp. 2805?2811, 2015.
Yang-Kyun Park, Tae-geun Son, Hwiyoung Kim, Jaegi Lee, Wonmo Sung, Il Han Kim, Kunwoo Lee, Young-bong Bang, and Sung-Joon Ye, "Development of real-time motion verification system using in-room optical images for respiratory-gated radiotherapy", Journal of Applied Clinical Medical Physics, Vol. 14, No. 5, pp.25-42.2013.
Jamie K. Paik, Bu Hyun Shin, Young-bong Bang and Young-Bo Shim, "Development of an Anthropo-   morphic Robotic Arm and Hand for Interactive Humanoids", Journal of Bionic Engineering, Vol. 9, No. 2, pp. 133-142, 2012.
Bu Hyun Shin, Seung-Wook Choi, Young-Bong Bang and Seung-Yop Lee, "An earthworm-like actuator using segmented solenoids", Smart Materials and Structures, Vol. 20, No. 10, pp. 105020, 2011.
Wonseok Lee, Young-bong Bang, Kyung-min Lee, Bu-hyun Shin, Jamie Kyujin Paik, and In-su Kim, "Motion Teaching Method for Complex Robot Links Using Motor Current", International Journal of Control, Automation, and Systems, Vol. 8, No. 5, pp. 1072-1081, 2010.
Ho-sang Kim, Kwang-il Lee, Kyung-min Lee, and Young-bong Bang, "Fabrication of free-form surfaces using a long-stroke fast tool servo and corrective figuring with on-machine measurement", International Journal of Machine Tools and Manufacture, Vol. 49, No. 12-13, pp.991-997, 2009.
Ho-sang Kim, Sang-in Kim, Kwang-il Lee, Dae-hee Lee, Young-bong Bang, and Kyo-il Lee, "Development of a programmable vibration cutting tool for diamond turning of hardened mold steels", International Journal of Advanced Manufacturing Technology, Vol. 40, No. 1-2, pp. 26-40, 2009.
Soon Woo Han, Young Bong Bang, and Yoon Young Kim, "Metal foil method for noncontact measurement of lateral vibrations of a nonmetallic cylinder by a solenoid", Applied Physics Letters, Vol. 89, No. 14, pp. 141905, 2006.
Wonseok Lee, Young-bong Bang, Myung Seon Ryou, Wook Hyun Kwon and Haeseong J. Jee , "Development of a PC based milling machine operated by STEP-NC in XML format", International Journal of Computer Integrated Manufacturing, Vol. 19, No. 6, pp. 593-602, 2006.
Myung Seon Ryou, Haeseong J. Jee, Wook Hyun Kwon and Young-Bong Bang , "Development of a Data Interface for Rapid Prototyping in STEP-NC", International Journal of Computer Integrated Manufacturing, Vol. 19, No. 6, pp. 614-626, 2006.
Young-Bong Bang, Jamie K. Paik, Bu-Hyun Shin, and Choongkil Lee , "3 DOF Anthropomorphic Oculomotor Simulator ", International Journal of Control, Automation, and Systems, Vol. 4, No. 2, pp. 227-235, 2006.
Young-bong Bang, Kyung-min Lee, Juho Kook, Wonseok Lee, In-su Kim , "Micro parts assembley system with micro gripper and RCC unit", IEEE Transactions on Robotics, Vol. 21, No. 3, pp. 465-470, 2005.
Young-bong Bang, Kyung-min Lee and Seungryul Oh , "5-axis Micro Milling Machine for Machining Micro Parts", International Journal of Advanced Manufacturing Technology, Vol. 25, No. 9-10, pp. 888-894, 2005.
Young-bong Bang and Kyung-min Lee, "Large thrust linear motors for low-duty-cycle operation", Mechatronics, Vol. 14, No. 8, pp. 891-906, 2004.
Young-bong Bang and Kyung-min Lee , "Linear motor for ejector mechanism", International Journal of Advanced Manufacturing Technology, Vol. 24, No. 7, pp.582-589, 2004.
Young-Bong Bang, Kyo-Il Lee, Choon-Shik Joo and Jae-Woong Hur , "Two-stage Electrohydraulic Servovalve Using Stack-type Piezoelectric Elements", Proceedings of the Institution of Mechanical Engineers C-Journal of Mechanical Engineering Science, Vol. 208, No. 1, pp. 53-65, 2004.
Wonseok Lee and Young-bong Bang , "The Design and Implementation of ISO 14649 Compliant CNC Milling Machine", International Journal of Production Research, Vol. 41, No. 13, pp. 3007-3017, 2003.
Y. B. Bang, S. Ito , "Linear Motor Drive Ultrahigh-Speed Injection Moulding Machine", Proceedings of the Institution of Mechanical Engineers B-Journal of engineering manufacture, Vol. 216, No. 5, pp. 773-781, 2002.
Toshiro Higuchi, Young-bong Bang, Yasuo Motegi, Masahiro Tsuda , "Automation of centered micro hole drilling using a magnetically levitated table", Vol. 39, No. 9, pp. 1409-1426, 1999.
Young-bong Bang and Toshiro Higuchi , "Drill Breakage Detection and Measurement of Distance to the Drilling Surface on the Micro Drilling Machine Using Voice Coil Motors", International Journal of the Japan Society for Precision Engineering (Currently, J . of the Int . Society for Precision Engineering and Nanotechnology ), Vol. 33, No. 1, pp. 15-20, 1999.
Young-bong Bang and Toshiro Higuchi , "Development of a Micro Drilling Machine Using Voice Coil Motors (Part 2) - Thrust Controlled Drilling", International Journal of the Japan Society for Precision Engineering , Vol. 32, No. 4, pp. 267-272, 1998.
Toshiro Higuchi and Young-bong Bang , "Development of a Micro Drilling Machine Using Voice Coil Motors - Drill Thrust Measurement and High Speed Driving", International Journal of the Japan Society for Precision Engineering , Vol. 32, No. 2, pp. 116-121, 1998.
 
Yang-Kyun Park, Tae-geun Son, Hwiyoung Kim, Jaegi Lee, Wonmo Sung, Il Han Kim, Kunwoo Lee, Young-bong Bang, and Sung-Joon Ye, "Development of real-time motion verification system using in-room optical images for respiratory-gated radiotherapy", Journal of Applied Clinical Medical Physics, Vol. 14, No. 5, pp.25-42.2013
 
Jamie K. Paik, Bu Hyun Shin, Young-bong Bang and Young-Bo Shim, "Development of an Anthropo-   morphic Robotic Arm and Hand for Interactive Humanoids", Journal of Bionic Engineering, Vol. 9, No. 2, pp. 133-142, 2012.
 
Bu Hyun Shin, Seung-Wook Choi, Young-Bong Bang and Seung-Yop Lee, "An earthworm-like actuator using segmented solenoids", Smart Materials and Structures, Vol. 20, No. 10, pp. 105020, 2011.
Wonseok Lee, Young-bong Bang, Kyung-min Lee, Bu-hyun Shin, Jamie Kyujin Paik, and In-su Kim, "Motion Teaching Method for Complex Robot Links Using Motor Current", International Journal of Control, Automation, and Systems, Vol. 8, No. 5, pp. 1072-1081, 2010.
Ho-sang Kim, Kwang-il Lee, Kyung-min Lee, and Young-bong Bang, "Fabrication of free-form surfaces using a long-stroke fast tool servo and corrective figuring with on-machine measurement", International Journal of Machine Tools and Manufacture, Vol. 49, No. 12-13, pp.991-997, 2009.
Ho-sang Kim, Sang-in Kim, Kwang-il Lee, Dae-hee Lee, Young-bong Bang, and Kyo-il Lee, "Development of a programmable vibration cutting tool for diamond turning of hardened mold steels", International Journal of Advanced Manufacturing Technology, Vol. 40, No. 1-2, pp. 26-40, 2009.
Soon Woo Han, Young Bong Bang, and Yoon Young Kim, "Metal foil method for noncontact measurement of lateral vibrations of a nonmetallic cylinder by a solenoid", Applied Physics Letters, Vol. 89, No. 14, pp. 141905, 2006.
Wonseok Lee, Young-bong Bang, Myung Seon Ryou, Wook Hyun Kwon and Haeseong J. Jee , "Development of a PC based milling machine operated by STEP-NC in XML format", International Journal of Computer Integrated Manufacturing, Vol. 19, No. 6, pp. 593-602, 2006.
Myung Seon Ryou, Haeseong J. Jee, Wook Hyun Kwon and Young-Bong Bang , "Development of a Data Interface for Rapid Prototyping in STEP-NC", International Journal of Computer Integrated Manufacturing, Vol. 19, No. 6, pp. 614-626, 2006.
Young-Bong Bang, Jamie K. Paik, Bu-Hyun Shin, and Choongkil Lee , "3 DOF Anthropomorphic Oculomotor Simulator ", International Journal of Control, Automation, and Systems, Vol. 4, No. 2, pp. 227-235, 2006.
Young-bong Bang, Kyung-min Lee, Juho Kook, Wonseok Lee, In-su Kim , "Micro parts assembley system with micro gripper and RCC unit", IEEE Transactions on Robotics, Vol. 21, No. 3, pp. 465-470, 2005.
Young-bong Bang, Kyung-min Lee and Seungryul Oh , "5-axis Micro Milling Machine for Machining Micro Parts", International Journal of Advanced Manufacturing Technology, Vol. 25, No. 9-10, pp. 888-894, 2005.
Young-bong Bang and Kyung-min Lee, "Large thrust linear motors for low-duty-cycle operation", Mechatronics, Vol. 14, No. 8, pp. 891-906, 2004.
Young-bong Bang and Kyung-min Lee , "Linear motor for ejector mechanism", International Journal of Advanced Manufacturing Technology, Vol. 24, No. 7, pp.582-589, 2004.
Young-Bong Bang, Kyo-Il Lee, Choon-Shik Joo and Jae-Woong Hur , "Two-stage Electrohydraulic Servovalve Using Stack-type Piezoelectric Elements", Proceedings of the Institution of Mechanical Engineers C-Journal of Mechanical Engineering Science, Vol. 208, No. 1, pp. 53-65, 2004.
Wonseok Lee and Young-bong Bang , "The Design and Implementation of ISO 14649 Compliant CNC Milling Machine", International Journal of Production Research, Vol. 41, No. 13, pp. 3007-3017, 2003.
Y. B. Bang, S. Ito , "Linear Motor Drive Ultrahigh-Speed Injection Moulding Machine", Proceedings of the Institution of Mechanical Engineers B-Journal of engineering manufacture, Vol. 216, No. 5, pp. 773-781, 2002.
Toshiro Higuchi, Young-bong Bang, Yasuo Motegi, Masahiro Tsuda , "Automation of centered micro hole drilling using a magnetically levitated table", Vol. 39, No. 9, pp. 1409-1426, 1999.
Young-bong Bang and Toshiro Higuchi , "Drill Breakage Detection and Measurement of Distance to the Drilling Surface on the Micro Drilling Machine Using Voice Coil Motors", International Journal of the Japan Society for Precision Engineering (Currently, J . of the Int . Society for Precision Engineering and Nanotechnology ), Vol. 33, No. 1, pp. 15-20, 1999.
Young-bong Bang and Toshiro Higuchi , "Development of a Micro Drilling Machine Using Voice Coil Motors (Part 2) - Thrust Controlled Drilling", International Journal of the Japan Society for Precision Engineering , Vol. 32, No. 4, pp. 267-272, 1998.
Toshiro Higuchi and Young-bong Bang , "Development of a Micro Drilling Machine Using Voice Coil Motors - Drill Thrust Measurement and High Speed Driving", International Journal of the Japan Society for Precision Engineering , Vol. 32, No. 2, pp. 116-121, 1998.